Jewelry Soldering Kit Flux Ceramic Silver Solder Board Third Hand Pick Tweezers

Description

JEWELRY SOLDERING KIT -
SET OF TOOLS & SOLDERS
8 PIECE SET
JETS KIT Product # 1020-400712
1.
SOLDERING BOARD
CERAMIC
PLATE HEAT RESISTANT 5" x 5" SQUARE BLOCK
JETS Product# 1922-4055
Made in USA
SPECIFICATIONS:
-
Dimensions:
5" x 5" x 1/2" Thick (120mm x120mm x 12.7mm)
-
Temperature Tolerance:
Up to
2000ºF / 950ºC
.
-
Reflects Heat
-
Ceramic (Non-Asbestos)
-
Board Weight:
14oz.
.
2.
SOLDERING PICK
TITANIUM TIP NON ROLL HANDLE
JETS Product # 1919-950 B
(Handle Color may Vary)
SPECIFICATIONS:
-
Overall Length:  6-1/2"  -  165mm
-
Pick Length:  2"  -  53mm
-
Handle: Non Rolling Handle NOTE (Hex End Head -Color may vary)
-
Weight:  0.6oz.  - 16gr
.
3. THIRD HAND BASE
HELPING HAND BASE ONLY TWEEZER TOOL HOLDER 3RD HAND BENCH WORK
JETS Product # 1418-101
SPECIFICATIONS:
-
Base Material:  Cast Iron
-
Base Diameter:  2-1316"  -  71.5mm
-
Base Weight:  12.2oz
.
4. FIBER GRIP
TWEEZERS
CROSS LOCKING SELF CLOSING  BENT TIP
JETS Product # 1419-5018
SPECIFICATIONS:
-
Overall length:  6-1/2”
-
Tweezer Tip:  Bent 45
o
- Serrated
-
Weight:  2 oz
.
5.
CROSS LOCK TWEEZER
SHORT POINTED SELF CLOSING REVERSE ACTION
JETS Product # 1419-5001
SPECIFICATIONS:
-
Overall length:  4-3/4”
-
Tweezer Tip:  Pointed
- Serrated
-
Weight:  2 oz
6.
HANDY FLUX™
- Paste
Made by Lucas Milhaupt 7oz.
JETS Product # 1924-407
Made in USA
All purpose, low temperature flux Handy
®
Flux is a long lasting white paste type, very durable won’t break down from prolonged heat
,
an all-purpose flux for use in brazing and soldering
Gold, Silver, Brass, Copper and other Non-Ferrous Metals
.
Flux is for torch brazing
-
NOT soldering iron
.
Handy Flux is an active fluoride/borate-type flux which is appropriate for all nonferrous metals and begins to melt and dissolve oxides at 600°F, having an effective temperature range from1100° F-1600° F.
Paste formula can be cleaned up with hot water.
Handy Flux
TM
is widely used in Jewelry Making, by Silversmiths, and in Creative Arts.
Prior to soldering make sure joints and the solder are clean, flux the full surface area to prevent oxidation and allow for good solder flow, and a good brazed joint.
.
Soldering Note:
Clean - Surface & Joint is important and not too much Solder, good even heat over entire joint area. Clean remove oxides and other soldering residues prior to finishing.
.
7.
WIRE Solders
Diameters 20ga  -  0.032" -  0.81mm  / Lengths: 12"
JETS Product # 1925-45331
Made in USA
SOFT/EASY
SPECIFICATIONS:
-
Solder:
Silver Content of 65%
-
Melt temperature:
1,240°F - 671°C
-
Flow temperature:
1,325°F  - 718°C
MEDIUM
SPECIFICATIONS:
-
-
Solder:
Silver Content of 70%
-
Melt temperature:
1,275°F - 691°C
-
Flow temperature:
1,360°F - 738°C
HARD
SPECIFICATIONS:
-
-
Solder:
Silver Content of 75%
-
Melt temperature:
1,365°F - 741°C
-
Flow temperature:
1,450°F - 788°C
.
8.
SHEET Solders
Measure: 1" x 1" Square - Weight 1Dwt – 1.5Gr
JETS Product # 1925-45223
Made in USA
SOFT/EASY
SPECIFICATIONS:
-
Solder:
Silver Content of 65%
-
Melt temperature:
1260
o
F - 682
o
C
-
Flow temperature:
1,325°F  - 718°C
MEDIUM
SPECIFICATIONS:
-
-
Solder:
Silver Content of 70%
-
Melt temperature:
1,295°F - 746°C
-
Flow temperature:
1,360°F - 738°C
HARD
SPECIFICATIONS:
-
-
Solder:
Silver Content of 75%
-
Melt temperature:
1,375°F - 746°C
-
Flow temperature:
1,450°F - 788°C
SHIPPING:
Via USPS PRIORITY MAIL
NOTE:  Visit
JETSTOOLS
our ebay Store Listings, where you can see individual components in this Kit along with a selection of many more
J
ewelers
E
quipment
T
ools
&
S
upplies
.
JETSINC.
PP 2.2Lz
1120  CKSP M P